| Mitsumi CD-R/RW Diagnostic Program |
This software inspects the performance of your MITSUMI CD-R/RW drives.
This software only allows "MS_DOS Mode" (Does not work in MS_DOS Prompt).
Please refer to the following information and check the cable connection before using
the diagnostic software.
1) Preparation
Prepare the following 3 types of CDs:
-Data CD-ROM (For example: Microsoft Windows 95/98 CD-ROM) for Read Performance testing.
(Please do not use recorded CD-R or RW discs.)
-1 blank CD-R disc
-1 blank CD-RW disc (CR-4808TE and CR-4809TE test requires high speed
CD-RW discs.)
2) Software Installation
After extracting the file, type cdrcheck.exe at your extracted directory.
3) Execution
Press [F1] key to start the program (Perform all items).
4) Test Items
1.Drive recognition
This software automatically recognizes the drive. (all MITSUMI CD-R/RW Drives). If you
can not see the Port, Model, or F/W information, please check the cable connection.
2.Tray eject test
Please follow the instructions on your screen.
-Does the tray open when you press the eject button?
YES: Press [Enter]
NO: Press [Space] key
-Does the tray close when you push the tray?
YES: Press [Enter]
NO: Press [Space] key
-Do you have any other mechanism or LED related problems?
Other problems:
Tray closes or opens with a loud noise.
Tray closes automatically without pressing the eject button.
Loading speed is very slow
Disc makes a scratching noise.
LED lamp is blinking.
YES: Press [Space] key
NO: Press [Enter]
3.Reading Performance test (search time and transfer rate)
Insert the Data CD-ROM and press [Enter].
Please make sure the Data CD does not have any scratches or fingerprints.
4.Writing Performance test for CD-R disc
Insert a blank CD-R disc and press [Enter].
(This disc can be used again for the same test but not for any other purpose.)
Please make sure the CD-R disc does not have any scratches or fingerprints.
5.Writing Performance test for CD-RW disc.
(CR-4808TE and CR-4849TE test requires high speed CD-RW
disc.)
Insert the blank CD-RW disc and press [Enter].
Please make sure the CD-RW disc does not have any scratches or fingerprints.
6.How to stop the Diagnostic test
Press [ESC] and [Enter] any time during the test. This aborts the test.
7.Log File
This program automatically creates a log file that includes the test results. Should you
have any problems, please contact Technical Support with this log file.
Technical Support: E-Mail support@mitsumi.com
| Error code | Error Name | Error Condition |
| RW1 | Found Exterior Problem | Found any problem for exterior |
| RW2 | Drive Not Found | Can not find the drive |
| RW3 | Can't Open Tray | Can not open the tray with Start/Stop Unit command |
| RW4 | Can't Close Tray | Can not close the tray with Start/Stop Unit command |
| RW5 | Drive NOT Ready | The drive is not ready for Test Unit Ready command |
| RW6 | Can't Detect CD | Can not detect the CD |
| RW7 | Not CD-ROM | Can not detect data track |
| RW8 | Read TOC Error | Read TOC command error |
| RW9 | CD-ROM Capacity Error | Read CD-ROM Capacity command error |
| RW10 | Read Error | Read(10) command error |
| RW11 | Average Search Time Too Long | Elapsed average time is over the specification |
| RW12 | Single Search Time Too Long | Elapsed time for 1-block read with Read(10) command is over the specification |
| RW13 | Not Enough Transfer Rate | Transfer rate is under the specification |
| RW14 | Drive NOT Ready | Drive is not ready |
| RW15 | Can't Detect CD | The drive can not detect CD |
| RW16 | Not CD-R | Can not detect the disc as CD-R disc |
| RW17 | Read Disc Info. Error | Read Disc Information command error |
| RW18 | Read Track Info. Error | Read Track Information command error |
| RW19 | Send OPC Info. Error | Send OPC Information command error(Failed to perform OPC for CD-R disc) |
| RW20 | Read Disc Info. Error | Read Disc Information command error to check the write laser power for OPC |
| RW21 | Invalid Disc Info. Data | Read Disc Information data is incorrect |
| RW22 | Invalid OPC Value | OPC value is out of erange |
| RW23 | Mode Select Error | Mode Select command error |
| RW24 | Read Disc Info. Error | Read Disc Information command error for packet writing |
| RW25 | Read Track Info. Error | Read Tack Information command error for packet writing |
| RW26 | Invalid Writable CD | Detected NWA_V bit was zero(means that next writable address is invalid) |
| RW27 | Buffer Capacity Error | Read Buffer Capacity command error |
| RW28 | Synchronize Cache Error | Synchronize Cache command error |
| RW29 | Write Command Error | Write(12) command error |
| RW30 | Buffer Under-run | Buffer Under-run happened |
| RW31 | Can't Read Track | Failed to read the written data(Read(10) command error) |
| RW32 | Illegal Data Found | Failed to verify the written data(Incorrect data was found) |
| RW33 | Read TOC Error | Read TOC command error |
| RW34 | Can't Detect CD | The drive can not detect CD |
| RW35 | Drive NOT Ready | Drive is not ready |
| RW36 | Not AUDIO CD | Drive can not find CD but it is not Audio CD |
| RW37 | Play Audio Error | Play Audio command error |
| RW38 | Mode Select LR CH Error | Failed to set the volume of both channels to MAX |
| RW39 | Output Error of Both CH | Can not hear sound from both channels |
| RW40 | Mode Select L CH Error | Failed to set the volume of left channel to MAX and right to zero |
| RW41 | Output Error of L CH | Can not hear sound from left channel |
| RW42 | Mode Select R CH Error | Failed to set the volume of right channel to MAX and left to zero |
| RW43 | Output Error of R CH | Can not hear sound from right channel |
| RW44 | Can't Detect CD | The drive can not detect CD |
| RW45 | Drive NOT Ready | Drive is not ready |
| RW46 | Not CD-RW | Can not detect the disc as CD-RW disc |
| RW47 | Read Disc Info. Error | Read Disc Information command error |
| RW48 | Read Track Info. Error | Read Track Information command error |
| RW49 | Send OPC Info. Error | Send OPC Information command error(Failed to perform OPC for CD-RW disc) |
| RW50 | Read Disc Info. Error | Read Disc Information command error to check OPC value |
| RW51 | Invalid Disc Information | Read Disc Information data is incorrect |
| RW52 | Invalid OPC Value | OPC value is out of erange |
| RW53 | Mode Select Error | Mode Select command error |
| RW54 | Read Disc Info. Error | Read Disc Information command error for writing track |
| RW55 | Read Track Info. Error | Read Tack Information command error for writing track |
| RW56 | Invalid Writable CD | Detected NWA_V bit was zero |
| RW57 | Buffer Capacity Error | Read Buffer Capacity command error |
| RW58 | Synchronize Cache Error | Synchronize Cache command error |
| RW59 | Write Command Error | Write(12) command error |
| RW60 | Buffer Under-run | Buffer Under-run happened |
| RW61 | Not CD-RW Drive | Means the drive does not support CD-RW media |
| RW62 | Track Erase Error | The track is found with Read Disc Information command after erasing it |
| RW63 | Blank Command Error | Blank command error |
| RW64 | Can't Read Track | Can not read the written data on the CD-RW test disc |
| RW65 | Illegal Data Found | Data verify error |
| RW66 | Not Blank CD-R Disc | Disc Status bits in Read Disc Information command is not 00(means that it is not an empty disc) |
| RW67 | Elapsed Time Over | Elapsed time is over the specification |
| RW68 | Drive Not Ready | Drive is not ready |
| RW69 | Can't Detect CD-R | The drive can not detect the disc |
| RW70 | Not Blank CD-R Disc | TOC data or CD-RW disc was detected |
| RW71 | Reserved | |
| RW72 | Read Disc Info. Error | Read Disc Information command error |
| RW73 | Not Packet Data Disc | TOC data was detected |
| RW74 | Can't recognize the new track | Can not find the last track information in PMA |
| RW75 | Mode Sense Command Error | Mode Sense command error |
| RW76 | Mode Sense Command Error | Mode Sense command error |
| RW77 | Drive Not Support DMA | The drive does not support DMA mode |
| RW78 | DMA ERROR | Can't get inquiry data by DMA mode. |
| RW79 | DMA Transfere Error | The bus master failed to transfer data |
| RW80 | Command Status Invalid | ATAPI command status is error |
| RW81 | Drive Check Condition | CHECK bit in ATAPI status resister is 1(an error occurred during execution of the previous command |
| RW82 | Drive Timeout(5sec) | Comand can't be completed correctly because of command timeout |
| AB1 | Port ID Error. Select Prim/Second | Tried to perform DMA test for Tertiary or Quaternary port |
| AB2 | Memory Allocation Error | Failed to allocate enough memory area |
| AB3 | PC Not Support DMA | Tried to perform DMA test with a PC that did not support DMA or had special chipset. |
| AB4 | EMM386 Installed | Tried to perform DMA test with a PC that EMM386.EXE was installed |
| AB5 | Operation Aborted | Oparation was aborted by the operator |
| RW83 | Set CD Speed Error | Set CD Speed command error |
| RW84 | Manual Eject Error | Any problem was found for manual tray eject test(Not open, Noisy and so on) |
| RW85 | Reserved | |
| RW86 | Tray push close Error | Any problem was found for tray push close test(Not close, Noisy and so on) |
| AB6 | Not Supported Drive | Not-supported drives are only connected to PC |
| RW** means that any error occurred | ||
| AB** means that the test has been aborted | ||
| Refer to Sense key, ASC and ASCQ too | ||